Majoros M., Collings E.W., Tomsic M., Peng X., Rindfleisch M., Doll D., Sumption M. D., Kovacs C., Xue S., Rochester J., Garg T.
Ключевые слова: undulator, MgB2, Jc/B curves, strands, coils racetrack, design parameters, fabrication, infiltration process, test results, modeling
Ключевые слова: presentation, LTS, Nb3Sn, wires, pinning centers artificial, fabrication, PIT process, interfaces, nucleation, microstructure
Ключевые слова: LTS, Nb3Sn, strands, specific heat, fabrication, mechanical treatment, elastic behavior, microstructure, experimental results
Ключевые слова: LTS, Nb3Sn, wires, Rutherford cables, specific heat, tapes, minimum quench energy, experimental results
Ключевые слова: LTS, Nb3Sn, wires, doping effect, fabrication, grain size, precipitation methods, pinning centers artificial, microstructure, pinning force
Ключевые слова: LTS, NbTi, Nb3Sn, wires, Rutherford cables, specific heat, minimum quench energy, current-voltage characteristics, test results
Ключевые слова: LTS, Nb3Sn, wires, grain boundaries, grain size, nanoscaled effects, PIT process, pinning centers artificial, comparison, microstructure, pinning force, experimental results
Ключевые слова: HTS, GdBCO, coated conductors, joints, modeling, laminations, crack formation, mechanical properties, tensile tests, interfaces, solder, stress distribution, fracture behavior
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, doping effect, heat capacity, stability, RRR parameter, flux pumps, quench energy, magnetization, microstructure, experimental results
Tomsic M., Sumption M., Peng X., Rindfleisch M., Doll D., Baig T., Martens M., Poole C., Deissler R.J., Amin A.A., Akkus O., Sabri L., Brown R.W., Mendris R.
Ключевые слова: MRI magnets, MgB2, wires, conduction cooled systems, design, review, persistent current mode, joint resistances, switches, quench detection, mechanical properties, stress effects, critical caracteristics, critical current, magnetic field dependence, Jc/B curves, n-value, magnetic field distribution, LTS, NbTi, comparison, minimum quench energy, thermal conductivity, specific heat, normal zone propagation, strain effects, design parameters
Ключевые слова: LTS, Nb3Sn, fabrication, strands, internal tin method, oxygenation treatments, heat treatment, microstructure
Majoros M., Collings E.W., Sumption M., Peng X., Yue J., Doll D., Haran K., Kovacs C., Loder D., Feddersen M., Sanchez R.
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.